Configuration

The recommended way of configuring Spring LDAP is to use the custom XML configuration namespace. To make this available, you need to include the Spring LDAP namespace declaration in your bean file, as follows:spring-doc.cn

<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:ldap="http://www.springframework.org/schema/ldap"
       xsi:schemaLocation="http://www.springframework.org/schema/beans https://www.springframework.org/schema/beans/spring-beans.xsd
       http://www.springframework.org/schema/ldap https://www.springframework.org/schema/ldap/spring-ldap.xsd">

`ContextSource` Configuration

ContextSource is defined by using an <ldap:context-source> tag. The simplest possible context-source declaration requires you to specify a server URL, a username, and a password, as follows:spring-doc.cn

Example 1. Simplest possible context-source declaration

<ldap:context-source
    username="cn=Administrator"
    password="secret"
    url="ldap://localhost:389" />

The preceding example creates an LdapContextSource with default values (see the table after this paragraph) and the URL and authentication credentials as specified. The configurable attributes on context-source are as follows (required attributes marked with *):spring-doc.cn

Table 1. ContextSource Configuration Attributes
Attribute	Default	Description
`id`spring-doc.cn	`contextSource`spring-doc.cn	The ID of the created bean.spring-doc.cn
`username`spring-doc.cn		The username (principal) to use when authenticating with the LDAP server. This is usually the distinguished name of an admin user (for example, `cn=Administrator`) but may differ depending on server and authentication method. Required if `authentication-source-ref` is not explicitly configured.spring-doc.cn
`password`spring-doc.cn		The password (credentials) to use when authenticating with the LDAP server. Required if `authentication-source-ref` is not explicitly configured.spring-doc.cn
`url` *spring-doc.cn		The URL of the LDAP server to use. The URL should be in the following format: `ldap://myserver.example.com:389`. For SSL access, use the `ldaps` protocol and the appropriate port — for example, `ldaps://myserver.example.com:636`. If you want fail-over functionality, you can specify more than one URL, separated by commas (`,`).spring-doc.cn
`base`spring-doc.cn	`LdapUtils.emptyLdapName()`spring-doc.cn	The base DN. When this attribute has been configured, all Distinguished Names supplied to and received from LDAP operations are relative to the specified LDAP path. This can significantly simplify working against the LDAP tree. However, there are several occasions when you need to have access to the base path. For more information on this, see Obtaining a Reference to the Base LDAP Path spring-doc.cn
`anonymous-read-only`spring-doc.cn	`false`spring-doc.cn	Defines whether read-only operations are performed by using an anonymous (unauthenticated) context. Note that setting this parameter to `true` together with the compensating transaction support is not supported and is rejected.spring-doc.cn
`referral`spring-doc.cn	`null`spring-doc.cn	Defines the strategy with which to handle referrals, as described here. The valid values are:spring-doc.cn `ignore`spring-doc.cn `follow`spring-doc.cn `throw`spring-doc.cn
`native-pooling`spring-doc.cn	`false`spring-doc.cn	Specify whether native Java LDAP connection pooling should be used. Consider using Spring LDAP connection pooling instead. See Pooling Support for more information.spring-doc.cn
`authentication-source-ref`spring-doc.cn	A `SimpleAuthenticationSource` instance.spring-doc.cn	ID of the `AuthenticationSource` instance to use (see Custom Principal and Credentials Management).spring-doc.cn
`authentication-strategy-ref`spring-doc.cn	A `SimpleDirContextAuthenticationStrategy` instance.spring-doc.cn	ID of the `DirContextAuthenticationStrategy` instance to use (see Custom `DirContext` Authentication Processing).spring-doc.cn
`base-env-props-ref`spring-doc.cn		A reference to a `Map` of custom environment properties that should supplied with the environment sent to the `DirContext` on construction.spring-doc.cn

`DirContext` Authentication

When DirContext instances are created to be used for performing operations on an LDAP server, these contexts often need to be authenticated. Spring LDAP offers various options for configuring this.spring-doc.cn

This section refers to authenticating contexts in the core functionality of the ContextSource, to construct DirContext instances for use by LdapClient and LdapTemplate. LDAP is commonly used for the sole purpose of user authentication, and the ContextSource may be used for that as well. That process is discussed in User Authentication using Spring LDAP.

By default, authenticated contexts are created for both read-only and read-write operations. You should specify the username and password of the LDAP user to be used for authentication on the context-source element.spring-doc.cn

If username is the Distinguished Name (DN) of an LDAP user, it needs to be the full DN of the user from the root of the LDAP tree, regardless of whether a base LDAP path has been specified on the context-source element.

Some LDAP server setups allow anonymous read-only access. If you want to use anonymous contexts for read-only operations, set the anonymous-read-only attribute to true.spring-doc.cn

Custom `DirContext` Authentication Processing

The default authentication mechanism used in Spring LDAP is SIMPLE authentication. This means that the principal (as specified by the username attribute) and the credentials (as specified by the password) are set in the Hashtable that is sent to the DirContext implementation constructor.spring-doc.cn

There are many occasions when this processing is not sufficient. For instance, LDAP Servers are commonly set up to accept communication only on a secure TLS channel. There might be a need to use the particular LDAP Proxy Auth mechanism or other concerns.spring-doc.cn

You can specify an alternative authentication mechanism by supplying a DirContextAuthenticationStrategy implementation reference to the context-source element. To do so, set the authentication-strategy-ref attribute.spring-doc.cn

TLS

Spring LDAP provides two different configuration options for LDAP servers that require TLS secure channel communication: DefaultTlsDirContextAuthenticationStrategy and ExternalTlsDirContextAuthenticationStrategy. Both implementations negotiate a TLS channel on the target connection, but they differ in the actual authentication mechanism. Where DefaultTlsDirContextAuthenticationStrategy applies SIMPLE authentication on the secure channel (by using the specified username and password), the ExternalTlsDirContextAuthenticationStrategy uses EXTERNAL SASL authentication, applying a client certificate that is configured by using system properties for authentication.spring-doc.cn

Since different LDAP server implementations respond differently to explicit shutdown of the TLS channel (some servers require the connection be shut down gracefully, while others do not support it), the TLS DirContextAuthenticationStrategy implementations support specifying the shutdown behavior by using the shutdownTlsGracefully parameter. If this property is set to false (the default), no explicit TLS shutdown happens. If it is true, Spring LDAP tries to shut down the TLS channel gracefully before closing the target context.spring-doc.cn

When working with TLS connections, you need to make sure that the native LDAP Pooling functionality (as specified by using the native-pooling attribute) is turned off. This is particularly important if shutdownTlsGracefully is set to false. However, since the TLS channel negotiation process is quite expensive, you can gain great performance benefits by using the Spring LDAP Pooling Support, described in Pooling Support.

Custom Principal and Credentials Management

While the user name (that is, the user DN) and password used for creating an authenticated Context are statically defined by default (the ones defined in the context-source element configuration are used throughout the lifetime of the ContextSource), there are several cases where this is not the desired behavior. A common scenario is that the principal and credentials of the current user should be used when performing LDAP operations for that user. You can modify the default behavior by supplying a reference to an AuthenticationSource implementation to the context-source element by using the authentication-source-ref element, instead of explicitly specifying the username and password. The AuthenticationSource is queried by the ContextSource for principal and credentials each time an authenticated Context is to be created.spring-doc.cn

If you use Spring Security, you can make sure the principal and credentials of the currently logged-in user are used at all times by configuring your ContextSource with an instance of the SpringSecurityAuthenticationSource shipped with Spring Security. The following example shows how to do so:spring-doc.cn

Example 2. Using the SpringSecurityAuthenticationSource

<beans>
...
    <ldap:context-source
        url="ldap://localhost:389"
        authentication-source-ref="springSecurityAuthenticationSource"/>

    <bean id="springSecurityAuthenticationSource"
        class="org.springframework.security.ldap.authentication.SpringSecurityAuthenticationSource" />
...
</beans>

We do not specify any username or password for. our context-source when using an AuthenticationSource. These properties are needed only when the default behavior is used.

When using the SpringSecurityAuthenticationSource, you need to use Spring Security’s LdapAuthenticationProvider to authenticate the users against LDAP.

Native Java LDAP Pooling

The internal Java LDAP provider provides some very basic pooling capabilities. You can turn this LDAP connection pooling on or off by using the pooled flag on AbstractContextSource. The default value is false (since release 1.3) — that is, the native Java LDAP pooling is turned off. The configuration of LDAP connection pooling is managed by using System properties, so you need to handle this manually, outside of the Spring Context configuration. You can find details of the native pooling configuration here.spring-doc.cn

There are several serious deficiencies in the built-in LDAP connection pooling, which is why Spring LDAP provides a more sophisticated approach to LDAP connection pooling, described in Pooling Support. If you need pooling functionality, this is the recommended approach.

Regardless of the pooling configuration, the ContextSource#getContext(String principal, String credentials) method always explicitly does not use native Java LDAP Pooling, in order for reset passwords to take effect as soon as possible.

Advanced `ContextSource` Configuration

This section covers more advanced ways to configure a ContextSource.spring-doc.cn

Custom `DirContext` Environment Properties

In some cases, you might want to specify additional environment setup properties, in addition to the ones directly configurable on context-source. You should set such properties in a Map and reference them in the base-env-props-ref attribute.spring-doc.cn

`LdapClient` Configuration

LdapClient is the new interface for calling an LDAP backend. It improves upon LdapTemplate in the following ways:spring-doc.cn

Provides built-in Stream supportspring-doc.cn
Provides a simplified API centered around bind ©, search ®, modify (U), unbind (D), and authenticate.spring-doc.cn

LdapClient does not yet support ODM. If this is something you need, LdapTemplate has this capacity. Both LdapClient and LdapTemplate can coexist quite nicely in the same application, if needed.

An LdapClient is defined by using the LdapClient#create factory method like so:spring-doc.cn

Example 3. Simplest possible LdapClient declaration

<bean id="ldapClient" class="org.springframework.ldap.core.LdapClient" factory-method="create">
   <constructor-arg ref="contextSource" />
</bean>

This element references the default ContextSource, which is expected to have an ID of contextSource (the default for the context-source element).spring-doc.cn

Your LdapClient instance can be configured for how to handle certain checked exceptions and what any default SearchControls should be used for queries.spring-doc.cn

`LdapTemplate` Configuration

The LdapTemplate is defined by using a <ldap:ldap-template> element. The simplest possible ldap-template declaration is the element by itself:spring-doc.cn

Example 4. Simplest possible ldap-template declaration

<ldap:ldap-template />

The element by itself creates an LdapTemplate instance with the default ID, referencing the default ContextSource, which is expected to have an ID of contextSource (the default for the context-source element).spring-doc.cn

The following table describes the configurable attributes on ldap-template:spring-doc.cn

Table 2. LdapTemplate Configuration Attributes
Attribute	Default	Description
`id`spring-doc.cn	`ldapTemplate`spring-doc.cn	The ID of the created bean.spring-doc.cn
`context-source-ref`spring-doc.cn	`contextSource`spring-doc.cn	The ID of the `ContextSource` instance to use.spring-doc.cn
`count-limit`spring-doc.cn	`0`spring-doc.cn	The default count limit for searches. 0 means no limit.spring-doc.cn
`time-limit`spring-doc.cn	`0`spring-doc.cn	The default time limit for searches, in milliseconds. 0 means no limit.spring-doc.cn
`search-scope`spring-doc.cn	`SUBTREE`spring-doc.cn	The default search scope for searches. The valid values are:spring-doc.cn `OBJECT`spring-doc.cn `ONELEVEL`spring-doc.cn `SUBTREE`spring-doc.cn
`ignore-name-not-found`spring-doc.cn	`false`spring-doc.cn	Specifies whether a `NameNotFoundException` should be ignored in searches. Setting this attribute to `true` make errors that are caused by an invalid search base be silently swallowed.spring-doc.cn
`ignore-partial-result`spring-doc.cn	`false`spring-doc.cn	Specifies whether `PartialResultException` should be ignored in searches. Some LDAP servers have problems with referrals. These should normally be followed automatically. However, if this does not work, it manifests itself with a `PartialResultException`. Setting this attribute to `true` presents a work-around to this problem.spring-doc.cn
`odm-ref`spring-doc.cn		The ID of the `ObjectDirectoryMapper` instance to use. The default is a default-configured `DefaultObjectDirectoryMapper`.spring-doc.cn

Obtaining a Reference to the Base LDAP Path

As described earlier, you can supply a base LDAP path to the ContextSource, specifying the root in the LDAP tree to which all operations are relative. This means that you are working only with relative distinguished names throughout your system, which is typically rather handy. There are, however, some cases in which you may need to have access to the base path in order to be able to construct full DNs, relative to the actual root of the LDAP tree. One example would be when working with LDAP groups (for example, the groupOfNames object class). In that case, each group member attribute value needs to be the full DN of the referenced member.spring-doc.cn

For that reason, Spring LDAP has a mechanism by which any Spring-controlled bean may be supplied with the base path on startup. For beans to be notified of the base path, two things need to be in place. First, the bean that wants the base path reference needs to implement the BaseLdapNameAware interface. Second, you need to define a BaseLdapPathBeanPostProcessor in the application context. The following example shows how to implement BaseLdapNameAware:spring-doc.cn

Example 5. Implementing BaseLdapNameAware

public class PersonService implements PersonService, BaseLdapNameAware {
   ...
   private LdapName basePath;

   public void setBaseLdapPath(LdapName basePath) {
      this.basePath = basePath;
   }
   ...
   private LdapName getFullPersonDn(Person person) {
      return LdapNameBuilder.newInstance(basePath)
          .add(person.getDn())
          .build();
   }
   ...
}

The following example shows how to define a BaseLdapPathBeanPostProcessor:spring-doc.cn

Example 6. Specifying a BaseLdapPathBeanPostProcessor in your ApplicationContext

<beans>
   ...
   <ldap:context-source
          username="cn=Administrator"
          password="secret"
          url="ldap://localhost:389"
          base="dc=261consulting,dc=com" />
   ...
   <bean class="org.springframework.ldap.core.support.BaseLdapPathBeanPostProcessor" />
</beans>

The default behavior of the BaseLdapPathBeanPostProcessor is to use the base path of the single defined BaseLdapPathSource (AbstractContextSource) in the ApplicationContext. If more than one BaseLdapPathSource is defined, you need to specify which one to use by setting the baseLdapPathSourceName property.spring-doc.cn

Configuration

ContextSource Configuration

DirContext Authentication

Custom DirContext Authentication Processing

TLS