Executable Jars

1. Nested JARs

Java does not provide any standard way to load nested jar files (that is, jar files that are themselves contained within a jar). This can be problematic if you need to distribute a self-contained application that can be run from the command line without unpacking.spring-doc.cn

To solve this problem, many developers use “shaded” jars. A shaded jar packages all classes, from all jars, into a single “uber jar”. The problem with shaded jars is that it becomes hard to see which libraries are actually in your application. It can also be problematic if the same filename is used (but with different content) in multiple jars. Spring Boot takes a different approach and lets you actually nest jars directly.spring-doc.cn

1.1. The Executable Jar File Structure

Spring Boot Loader-compatible jar files should be structured in the following way:spring-doc.cn

example.jar
 |
 +-META-INF
 |  +-MANIFEST.MF
 +-org
 |  +-springframework
 |     +-boot
 |        +-loader
 |           +-<spring boot loader classes>
 +-BOOT-INF
    +-classes
    |  +-mycompany
    |     +-project
    |        +-YourClasses.class
    +-lib
       +-dependency1.jar
       +-dependency2.jar

Application classes should be placed in a nested BOOT-INF/classes directory. Dependencies should be placed in a nested BOOT-INF/lib directory.spring-doc.cn

1.2. The Executable War File Structure

Spring Boot Loader-compatible war files should be structured in the following way:spring-doc.cn

example.war
 |
 +-META-INF
 |  +-MANIFEST.MF
 +-org
 |  +-springframework
 |     +-boot
 |        +-loader
 |           +-<spring boot loader classes>
 +-WEB-INF
    +-classes
    |  +-com
    |     +-mycompany
    |        +-project
    |           +-YourClasses.class
    +-lib
    |  +-dependency1.jar
    |  +-dependency2.jar
    +-lib-provided
       +-servlet-api.jar
       +-dependency3.jar

Dependencies should be placed in a nested WEB-INF/lib directory. Any dependencies that are required when running embedded but are not required when deploying to a traditional web container should be placed in WEB-INF/lib-provided.spring-doc.cn

1.3. Index Files

Spring Boot Loader-compatible jar and war archives can include additional index files under the BOOT-INF/ directory. A classpath.idx file can be provided for both jars and wars, and it provides the ordering that jars should be added to the classpath. The layers.idx file can be used only for jars, and it allows a jar to be split into logical layers for Docker/OCI image creation.spring-doc.cn

Index files follow a YAML compatible syntax so that they can be easily parsed by third-party tools. These files, however, are not parsed internally as YAML and they must be written in exactly the formats described below in order to be used.spring-doc.cn

1.4. Classpath Index

The classpath index file can be provided in BOOT-INF/classpath.idx. Typically, it is generated automatically by Spring Boot’s Maven and Gradle build plugins. It provides a list of jar names (including the directory) in the order that they should be added to the classpath. When generated by the build plugins, this classpath ordering matches that used by the build system for running and testing the application. Each line must start with dash space ("-·") and names must be in double quotes.spring-doc.cn

For example, given the following jar:spring-doc.cn

example.jar
 |
 +-META-INF
 |  +-...
 +-BOOT-INF
    +-classes
    |  +...
    +-lib
       +-dependency1.jar
       +-dependency2.jar

The index file would look like this:spring-doc.cn

- "BOOT-INF/lib/dependency2.jar"
- "BOOT-INF/lib/dependency1.jar"

Spring Boot only uses the classpath index file when the jar or war file is executed with java -jar. It is not used when running the application from the IDE or when using Maven’s spring-boot:run or Gradle’s bootRun.

When enabling reproducible builds, the entries in the classpath index file are sorted alphabetically.

1.5. Layer Index

The layers index file can be provided in BOOT-INF/layers.idx. It provides a list of layers and the parts of the jar that should be contained within them. Layers are written in the order that they should be added to the Docker/OCI image. Layers names are written as quoted strings prefixed with dash space ("-·") and with a colon (":") suffix. Layer content is either a file or directory name written as a quoted string prefixed by space space dash space ("··-·"). A directory name ends with /, a file name does not. When a directory name is used it means that all files inside that directory are in the same layer.spring-doc.cn

A typical example of a layers index would be:spring-doc.cn

- "dependencies":
  - "BOOT-INF/lib/dependency1.jar"
  - "BOOT-INF/lib/dependency2.jar"
- "application":
  - "BOOT-INF/classes/"
  - "META-INF/"

2. Spring Boot’s “NestedJarFile” Class

The core class used to support loading nested jars is org.springframework.boot.loader.jar.NestedJarFile. It lets you load jar content from nested child jar data. When first loaded, the location of each JarEntry is mapped to a physical file offset of the outer jar, as shown in the following example:spring-doc.cn

myapp.jar
+-------------------+-------------------------+
| /BOOT-INF/classes | /BOOT-INF/lib/mylib.jar |
|+-----------------+||+-----------+----------+|
||     A.class      |||  B.class  |  C.class ||
|+-----------------+||+-----------+----------+|
+-------------------+-------------------------+
 ^                    ^           ^
 0063                 3452        3980

The preceding example shows how A.class can be found in /BOOT-INF/classes in myapp.jar at position 0063. B.class from the nested jar can actually be found in myapp.jar at position 3452, and C.class is at position 3980.spring-doc.cn

Armed with this information, we can load specific nested entries by seeking to the appropriate part of the outer jar. We do not need to unpack the archive, and we do not need to read all entry data into memory.spring-doc.cn

2.1. Compatibility With the Standard Java “JarFile”

Spring Boot Loader strives to remain compatible with existing code and libraries. org.springframework.boot.loader.jar.NestedJarFile extends from java.util.jar.JarFile and should work as a drop-in replacement.spring-doc.cn

Nested JAR URLs of the form jar:nested:/path/myjar.jar/!BOOT-INF/lib/mylib.jar!/B.class are supported and open a connection compatible with java.net.JarURLConnection. These can be used with Java’s URLClassLoader.spring-doc.cn

3. Launching Executable Jars

The org.springframework.boot.loader.launch.Launcher class is a special bootstrap class that is used as an executable jar’s main entry point. It is the actual Main-Class in your jar file, and it is used to setup an appropriate ClassLoader and ultimately call your main() method.spring-doc.cn

There are three launcher subclasses (JarLauncher, WarLauncher, and PropertiesLauncher). Their purpose is to load resources (.class files and so on) from nested jar files or war files in directories (as opposed to those explicitly on the classpath). In the case of JarLauncher and WarLauncher, the nested paths are fixed. JarLauncher looks in BOOT-INF/lib/, and WarLauncher looks in WEB-INF/lib/ and WEB-INF/lib-provided/. You can add extra jars in those locations if you want more.spring-doc.cn

The PropertiesLauncher looks in BOOT-INF/lib/ in your application archive by default. You can add additional locations by setting an environment variable called LOADER_PATH or loader.path in loader.properties (which is a comma-separated list of directories, archives, or directories within archives).spring-doc.cn

3.1. Launcher Manifest

You need to specify an appropriate Launcher as the Main-Class attribute of META-INF/MANIFEST.MF. The actual class that you want to launch (that is, the class that contains a main method) should be specified in the Start-Class attribute.spring-doc.cn

The following example shows a typical MANIFEST.MF for an executable jar file:spring-doc.cn

Main-Class: org.springframework.boot.loader.launch.JarLauncher
Start-Class: com.mycompany.project.MyApplication

For a war file, it would be as follows:spring-doc.cn

Main-Class: org.springframework.boot.loader.launch.WarLauncher
Start-Class: com.mycompany.project.MyApplication

You need not specify Class-Path entries in your manifest file. The classpath is deduced from the nested jars.

4. PropertiesLauncher Features

PropertiesLauncher has a few special features that can be enabled with external properties (System properties, environment variables, manifest entries, or loader.properties). The following table describes these properties:spring-doc.cn

Key Purpose

Key	Purpose
`loader.path`spring-doc.cn	Comma-separated Classpath, such as `lib,${HOME}/app/lib`. Earlier entries take precedence, like a regular `-classpath` on the `javac` command line.spring-doc.cn
`loader.home`spring-doc.cn	Used to resolve relative paths in `loader.path`. For example, given `loader.path=lib`, then `${loader.home}/lib` is a classpath location (along with all jar files in that directory). This property is also used to locate a `loader.properties` file, as in the following example `/opt/app` It defaults to `${user.dir}`.spring-doc.cn
`loader.args`spring-doc.cn	Default arguments for the main method (space separated).spring-doc.cn
`loader.main`spring-doc.cn	Name of main class to launch (for example, `com.app.Application`).spring-doc.cn
`loader.config.name`spring-doc.cn	Name of properties file (for example, `launcher`). It defaults to `loader`.spring-doc.cn
`loader.config.location`spring-doc.cn	Path to properties file (for example, `classpath:loader.properties`). It defaults to `loader.properties`.spring-doc.cn
`loader.system`spring-doc.cn	Boolean flag to indicate that all properties should be added to System properties. It defaults to `false`.spring-doc.cn

loader.pathspring-doc.cn

Comma-separated Classpath, such as lib,${HOME}/app/lib. Earlier entries take precedence, like a regular -classpath on the javac command line.spring-doc.cn

loader.homespring-doc.cn

Used to resolve relative paths in loader.path. For example, given loader.path=lib, then ${loader.home}/lib is a classpath location (along with all jar files in that directory). This property is also used to locate a loader.properties file, as in the following example /opt/app It defaults to ${user.dir}.spring-doc.cn

loader.argsspring-doc.cn

Default arguments for the main method (space separated).spring-doc.cn

loader.mainspring-doc.cn

Name of main class to launch (for example, com.app.Application).spring-doc.cn

loader.config.namespring-doc.cn

Name of properties file (for example, launcher). It defaults to loader.spring-doc.cn

loader.config.locationspring-doc.cn

Path to properties file (for example, classpath:loader.properties). It defaults to loader.properties.spring-doc.cn

loader.systemspring-doc.cn

Boolean flag to indicate that all properties should be added to System properties. It defaults to false.spring-doc.cn

When specified as environment variables or manifest entries, the following names should be used:spring-doc.cn

Key Manifest entry Environment variable

Key	Manifest entry	Environment variable
`loader.path`spring-doc.cn	`Loader-Path`spring-doc.cn	`LOADER_PATH`spring-doc.cn
`loader.home`spring-doc.cn	`Loader-Home`spring-doc.cn	`LOADER_HOME`spring-doc.cn
`loader.args`spring-doc.cn	`Loader-Args`spring-doc.cn	`LOADER_ARGS`spring-doc.cn
`loader.main`spring-doc.cn	`Start-Class`spring-doc.cn	`LOADER_MAIN`spring-doc.cn
`loader.config.location`spring-doc.cn	`Loader-Config-Location`spring-doc.cn	`LOADER_CONFIG_LOCATION`spring-doc.cn
`loader.system`spring-doc.cn	`Loader-System`spring-doc.cn	`LOADER_SYSTEM`spring-doc.cn

loader.pathspring-doc.cn

Loader-Pathspring-doc.cn

LOADER_PATHspring-doc.cn

loader.homespring-doc.cn

Loader-Homespring-doc.cn

LOADER_HOMEspring-doc.cn

loader.argsspring-doc.cn

Loader-Argsspring-doc.cn

LOADER_ARGSspring-doc.cn

loader.mainspring-doc.cn

Start-Classspring-doc.cn

LOADER_MAINspring-doc.cn

loader.config.locationspring-doc.cn

Loader-Config-Locationspring-doc.cn

LOADER_CONFIG_LOCATIONspring-doc.cn

loader.systemspring-doc.cn

Loader-Systemspring-doc.cn

LOADER_SYSTEMspring-doc.cn

Build plugins automatically move the Main-Class attribute to Start-Class when the uber jar is built. If you use that, specify the name of the class to launch by using the Main-Class attribute and leaving out Start-Class.

The following rules apply to working with PropertiesLauncher:spring-doc.cn

loader.properties is searched for in loader.home, then in the root of the classpath, and then in classpath:/BOOT-INF/classes. The first location where a file with that name exists is used.spring-doc.cn
loader.home is the directory location of an additional properties file (overriding the default) only when loader.config.location is not specified.spring-doc.cn
loader.path can contain directories (which are scanned recursively for jar and zip files), archive paths, a directory within an archive that is scanned for jar files (for example, dependencies.jar!/lib), or wildcard patterns (for the default JVM behavior). Archive paths can be relative to loader.home or anywhere in the file system with a jar:file: prefix.spring-doc.cn
loader.path (if empty) defaults to BOOT-INF/lib (meaning a local directory or a nested one if running from an archive). Because of this, PropertiesLauncher behaves the same as JarLauncher when no additional configuration is provided.spring-doc.cn
loader.path can not be used to configure the location of loader.properties (the classpath used to search for the latter is the JVM classpath when PropertiesLauncher is launched).spring-doc.cn
Placeholder replacement is done from System and environment variables plus the properties file itself on all values before use.spring-doc.cn
The search order for properties (where it makes sense to look in more than one place) is environment variables, system properties, loader.properties, the exploded archive manifest, and the archive manifest.spring-doc.cn

5. Executable Jar Restrictions

You need to consider the following restrictions when working with a Spring Boot Loader packaged application:spring-doc.cn

Zip entry compression: The ZipEntry for a nested jar must be saved by using the ZipEntry.STORED method. This is required so that we can seek directly to individual content within the nested jar. The content of the nested jar file itself can still be compressed, as can any other entry in the outer jar.spring-doc.cn

System classLoader: Launched applications should use Thread.getContextClassLoader() when loading classes (most libraries and frameworks do so by default). Trying to load nested jar classes with ClassLoader.getSystemClassLoader() fails. java.util.Logging always uses the system classloader. For this reason, you should consider a different logging implementation.spring-doc.cn

6. Alternative Single Jar Solutions

If the preceding restrictions mean that you cannot use Spring Boot Loader, consider the following alternatives:spring-doc.cn